Fujian Anlin Intelligent Science And Technology Co. Ltd

Among the first companyes in the door and window motor
industry in mainland china listed in the SSE. (stock code:100091)
banner3-

News

Home / News

product menu

Hot Products

  • Rolling Shutter Side Motor

    AC Rolling Shutter Side Motor

    Widely used in openning and closing the rolling shutter door of supermarket, storehouse, cinema, hotel, factory etc..

  • automatic rolling door motor

    Rolling Door Motor With Electronic Limit Switch

    electronic limit, absolute value, precision positioning , prvent to rush out of limit position. 1. easy installation: Travel limit setting by receiver; 2. intelligent control: Anti running out limit; 3. Stability: Highly protect motor in thunderstorm weather; 4. Lower noise: using the high precision gear and shaft;  5. Security: it can match with many safety function.

  • Rolling Shutter Side Motor

    AC roller shutter motor controller 600Kg

    Separate circuit control ensures the security Safety brake,accurate limited control positioning,with double limit switch protection, prevent door   over roll-up. UPS automatic system is available,No bother of power failure

How to installation and debugging the Rolling Door motor?

August 31,2019.

1.Our products are made according to the right installation methods (look out of the inside doors), The users should spin 4 tightened screws if the products will be installed on the left side: relock the 4 screws tightly after making a 180º rotation of the Chain Cage, the wire colors of “white (up)”and “green (down)”must be changed.
2. The Sprocket Bracket can be installed horizontally as shown figure.3.The users can also install this product within 0º-45º. When the sprocket Bracket wasn’t the horizontal installation, the users should spin the automatic cage and give the circle Chain a vertical downward pull. At the same time, the cage must be matched with the end of the motor. After the users make sure that there is no interval between the motor and the cage, please wring the screws tightly, In order to avoid affecting the automatic brake, please don’t wring the cage badly.
Rolling Door Motors should be installed horizontally, the portier and the reel should be concentric and horizontal, the curtain pieces can’t be stuck.
Adjust the Chain a vertical downward pull 3-6mm.
Strictly forbid users to pull the fairlead of motors.
The cross section area of external wire to the motor must be less than 1mm2.
In order to avoid being short-out in the Electric Rolling Door Motor lead to the Electric Rolling Door Motor is burnt, please pay attention to prevent the motors from being soaked and damped.
Please connect to the ground well according to the instruction.
The users should connect to the power PH order correctly. The right installation: The motor can rotate in a counterclockwise direction ( look out of the bottom bracket) when the users push the “up”(white wire) press button. With reference fig.1
Debugging of spacing collar and spacing block:
The users should untie the screw nails.3 of spacing structure, then pull the Chain by manual operation, the distance from the curtain door to the ground is about 1m. Firstly, The users can try the “up”operation, the “down” operation and the “stop” operation.
The users should check that whether the operations are normal or not. If normal, the users can pull the curtain door in the best position that are made sure.
After this operation, the users should rotate the Spacing Collar5, adjust to the Switch 2, after we heard the “tick”voice, the users can lock the  Screw nail 3, try it over and over, relock the screws.
Radom accessories:
1. one bracket          2. one chain wheel           3.one Chain
4.one mandrel           5. one bearing               6. one rotor
7. two bracing boards   8. one press button          9. switch box



Tel :+86-18959610089
Add :Guanshan Industrial Park Wu'an Town Changtai County Zhangzhou city, Fujian China (mainland)
service online

Service Online

86-18959610089

86-18959610089

+86-18959610089

+86-18959610089

86-18959610089

86-18959610089