| Quantity: | |
|---|---|
Motor three gears speed regulation
The motor running speed is factory default middle gear.At the same time, press and hold the stop button + up button for more than 2 seconds, the controller beeps and then the motor running speed rises by one gear, such as the original speed for the middle gear, upshift for fast gear, display function code EE000, display 2 seconds after the function code to display the number of times of operation.At the same time, press and hold the stop button + down button for more than 2 seconds, the controller beeps after the motor running speed down a gear, such as the original speed for the fast gear, downshift for the middle gear, display function code
EE002, display 2 seconds after the function code to display the number of times of operation. Again long press the stop button + down button for more than 2 seconds, down to low gear.
Motor soft start and soft stop function
The product comes with slow start and stop function, factory default strong gear (slow start and stop effect is the strongest).At the same time, press and hold the debug button (in the control box) + up key for more than 2 seconds, the controller beeps after the successful shift, such as the original speed for the strong gear, shift for the middle gear, display the function code EE004, display the function code for 2 seconds and then turn to display the number of times of operation.
Note: Each time long press the power debugging button + up key for more than 2 seconds, in order to shiftgears: strong → weak → medium→ strong.
Motor three gears speed regulation
The motor running speed is factory default middle gear.At the same time, press and hold the stop button + up button for more than 2 seconds, the controller beeps and then the motor running speed rises by one gear, such as the original speed for the middle gear, upshift for fast gear, display function code EE000, display 2 seconds after the function code to display the number of times of operation.At the same time, press and hold the stop button + down button for more than 2 seconds, the controller beeps after the motor running speed down a gear, such as the original speed for the fast gear, downshift for the middle gear, display function code
EE002, display 2 seconds after the function code to display the number of times of operation. Again long press the stop button + down button for more than 2 seconds, down to low gear.
Motor soft start and soft stop function
The product comes with slow start and stop function, factory default strong gear (slow start and stop effect is the strongest).At the same time, press and hold the debug button (in the control box) + up key for more than 2 seconds, the controller beeps after the successful shift, such as the original speed for the strong gear, shift for the middle gear, display the function code EE004, display the function code for 2 seconds and then turn to display the number of times of operation.
Note: Each time long press the power debugging button + up key for more than 2 seconds, in order to shiftgears: strong → weak → medium→ strong.
